CHECKLIST BEFORE POWERING-UP
The internal portion of the system with all the components and cables. Ensure that all the cables have been properly plugged in and that no cables are obstructing any of the fans
Here is a checklist of items to perform before powering up:-
Check the AC voltage switch on your power supply before connecting it to the mains. Never assume that the power supply has been set correctly to operate in your local AC voltage. Always double check this item, or you could damage the entire system due to incorrect operating voltage. Once you've done that, connect the power cable from the mains to your power supply. Remember to turn on the power switch on your power supply (if there is one). Users often forget to flip the switch before attempting to power up.
You should have a monitor ready, all connected and turned on. If you have an analog monitor, connect the cable to the VGA connector (the blue connector) on the graphics card. Those with a digital flat panel monitor with DVI support should use an appropriate DVI cable to achieve the best display quality.
Connect your mouse and keyboard to the PS/2 ports located at the rear I/O panel. The mouse connector is colored green while the keyboard connector is colored purple.
If you have speakers, follow the output diagrams and plug them into the provided audio jacks accordingly. There won't be any audio output at your first boot. You'll get proper audio only after Windows and the audio drivers have been installed.
The system glowing with life...
No comments:
Post a Comment